Jeudi, 20 Mai 2010 11:03

It is OFFICIAL!  The Dude! Cruise.. that many of you have been hearing about, is officially ready for you the customer.  This board is based off of the idea of a retro fish shape surfboard.  It's wide in the nose so it can push through soft sections, but loose in the tail so you can still turn it on a dime.  We've put it to the test in all conditions, and everyone comes up wanting more.  

The Dude! Cruise is now up on our Board Shapes page, just follow the link here:

http://exileskimboards.com/en/board-shapes.html

This board comes in three sizes, the Yacht (50.3 x 21, tailpoint's are 5" apart) as shown here, Woody Harris in ForeverSkimTheMag:

The Cruise Ship (50.5 x 21.4, tailpoints are 5.5" apart) seen here, Henry Ward in ForeverSkimTheMag:

And the newest size, the USS Excelsior.  This size is for riders about 190lbs and up.  The dimensions are 22"x52.5", and it will float for years. 

These three sizes will cover anyone from around 90 lbs. up to about 250 lbs., and the results have been great on both boards.  Since there is so much surface area under your front foot, riders of varying weights can ride the same size board, whereas with narrower boards you need to bump up and down in size in about 20 lbs increments. 

The Dude! Cruise comes standard in 3/4" foam planed down to 5/8" in the tail for as much float as possible, while still allowing the rider to lay on the tail for responsive turns.  It is the same cost as our other shapes. Eglass Epoxy: $384.  Sglass Epoxy: $410.  Double Carbon Epoxy: $459.  Be one of the first in your area to get a Dude! Cruise, it's sure to make you smile!

(If you follow us on Facebook, check out our Dude! Cruise photo album for updates on new Dude! Cruise's that come out of the factory, as well as shots of riders on Dude! Cruise's...)